Tsunami®.GX 32 Product Specifications
| Frequency |
5725-5850 MHz |
| Digital Capacity |
32 Mbps24 Mbps |
| Non-Overlapping Frequency Pairs |
32 |
| FCC Emmission Designator |
13M4G7D |
| Threshold (BER=1x10-6) |
≥85 dBm≥86 dBm |
| Output Power |
≥23.5 dBm |
| System Gain |
≥109.5 dB, 112 dB typ.
≥108.5 dB, 111 dB typ. |
| Distance (Miles/KM) |
42/6844/71 |
| System |
| Configuration |
Split-box: IDU, RF Unit |
| Modulation |
DSSS; QPSK |
| Frequency Stability |
±10 ppm |
| RF Attenuation Range1 |
20 dB |
| Maximum Receive Signal |
-20 dBm error free; 0 dBm no damage |
| Error Floor |
‹10-11 |
| Latency (T1)2, one-way |
325 µsec ±10% |
| Error Correction |
Reed-Solomon |
| Security |
12 character Link ID (48 bits) |
| Regulatory Compliance |
FCC Part 15.247; IC RS210 |
| FCC ID |
HZB-S58-GX1 |
| Industry Canada ID |
1856A-U5358GX1 |
| Digital Line Interfaces |
| Main Data Channel4 |
| 3-Channel Mode 2-Channel Mode |
32 Mbps aggregate; 16 Mbps full duplex 24 Mbps aggregate; 12 Mbps full duplex |
| 10/100 Base T |
RJ-45 modular jackAuto-sense MDI/MDI-X |
| 10/100 Base FX |
SC-Type, multi-mode Fiber |
| Compliance |
IEEE 802.3 |
| Wayside Data Channels |
| T1/E1 |
DSX-1 (2 each) or CEPT-1 (2 each), software selectable RJ-48C modular jack |
| Compliance |
| Maximum Packet Size |
1536 bytes |
| T1 E1 |
ANSI-1987-T1, CCITT G.823G.703 |
| Auxiliary Interfaces |
| Orderwire (DTMF) |
RJ-11, 100 addresses |
| VF |
8 pin modular jack, 4-wire0dBm @ 600 ohm, balanced |
| Aux Data (serial) |
8 pin modular jack, EIA-561≤19.2kbps, selectable, DCE |
| Fault and Configuration Management |
| Network Management |
SNMP v2c (MIB II, Proxim enterprise MIBs), embedded HTML server, Telnet, VT-100 terminal |
| Far End Management |
Via NMS (embedded router, gateway address, subnet mask), front panel display |
| Physical Interfaces |
| NMS 1 |
10/100BaseT, RJ-45, auto-sense |
| NMS 2 |
10/100BaseT, RJ-45, auto-sense |
| Configuration (serial) |
EIA-574, 9600bps, 9-pinSub-D, DTE |
| External Alarm Interface |
| Connector |
9-pin Sub-D female |
| Outputs |
2 Form C Relays (Major, Minor) |
| Inputs |
2 TTL with internal pull-ups |
| Power/Environment |
| Input Voltage Range |
-20 to -60 Vdc or +20 to +60 Vdc |
| Power Consumption |
‹70 Watts |
| Power Connector |
3-pin terminal block |
| Operating Temperature |
| IDU |
0°C to +50°C |
| RF Unit |
-30°C to +55°C |
| Humidity |
| IDU |
95%, non-condensing |
| RF Unit |
100%, condensing |
| Altitude |
up to 15,000 ft/5000 m |
| Wind Loading (RF Unit) |
up to 110 mph/96 kts |
| MTBF IDUMTBF RF Unit |
>100,000 hours>100,000 hours |
| Physical Dimensions |
|
IDU |
RF Unit |
| Size (in/cm) |
17.2 X 10.9 X 1.72 / (43.6 X 27.6 X 4.4) |
14.1 X 10.9 X 1.72 / (35.8 X 27.6 X 4.4) |
| Weight (lbs/kg) |
6.5/2.9 |
12.0/5.4 |
| Mechanical |
| RF Unit |
Antenna Port |
Type-N female(outdoor RF cable not provided) |
|
IDU Port |
TNC female |
|
Cable to IDU |
LMR-240 or equiv. ‹100m LMR-400 or equiv. ‹200m LMR-600 or equiv. ‹300m |
| Mounting |
IDU |
EIA rackmount, 19” or 23”, 1RU |
|
RF Unit |
EIA rackmount, 19”or 23”, 1RU, or outdoor pole mount |
|
Pole Mount Bracket (optional) |
|
| Selectable Non-Overlapping Frequency Plans |
| 2-Channel Mode |
A: 5734 / 5819 MHz
B: 5756 / 5841 MHz |
| 3-Channel Mode |
A: 5731.5 / 5816.5 MHz
B: 5745.0 / 5830.0 MHz
C: 5758.5 / 5843.0 MHz |
| Ordering Information |
|
64765 |
Low Band Terminal |
|
64766 |
High Band Terminal |
|
ACC-GX-RF-2 |
Optional RF Unit Outdoor Mounting Kit |
|
201-31075-1 |
Optional AC Adapter 110/220 VAC with cable and connector |
|
Call for details |
ServPak 24x7 Enhanced Service and Support contracts (1yr-3yr) |
| Shipping Configuration |
| Tsunami.GX 32 IDU (Indoor Unit); ISM Low Band or High Band RF Unit;
IDU Indoor Rack Management Kit; ACC-GX-RF-1 RF Unit Indoor Mounting Kit (includes 12” IDU to RFU TNC-to-TNC cable); Quick Install Guide; CD-User Documentation |
1 Output power is specified at zero attenuation
2 Does not include air latency of approximately 5.4 µsec/mile
3 RF Unit installed outdoors with 6ft. parabolic antenna, 99.995% one-way RF link availability, average climate/terrain, no multipath reflection. Assumes FCC regulations for EIRP
4 No Waysides enabled